Netbios-Name-Server; Netbios-Node-Type - Dell Force10 Z9000 Reference Manual

netbios-name-server

Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available
to Microsoft Dynamic Host Configuration Protocol (DHCP) clients.
C-Series, S-Series, Z-Series, S4810
Syntax netbios-name-server address [address2...address8]
Parameters
address
Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

netbios-node-type

Specify the NetBIOS node type for a Microsoft DHCP client. Dell Force10 recommends specifying clients as hybrid.
C-Series, S-Series, Z-Series, S4810
Syntax netbios-node-type type
Parameters
type
Defaults Hybrid
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
596
Enter the address of the NETBIOS name server. You may enter up to
eight, in order of preference.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the NETBIOS node type:
• Broadcast: Enter the keyword b-node.
• Hybrid: Enter the keyword h-node.
• Mixed: Enter the keyword m-node.
• Peer-to-peer: Enter the keyword p-node.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.