Show Hardware System-Flow - Dell Force10 Z9000 Reference Manual

show hardware system-flow

Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S-Series, Z-Series
Syntax show hardware system-flow layer2 stack-unit id port-set 0-3
[counters]
Parameters
acl | qos
stack-unit
port-set
[counters]
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 7.8.1.0
Example
FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0
counters
-----------------------------------------------------------
EntryId Description
-----------------------------------------------------------
2048
2047
2045
2044
2043
2042
2041
2040
2039
2038
2037
2036
2035
2034
2033
384
383
382
380
379
4
588
For the selected stack member and stack member port-pipe, display
which system flow entry the packet hits and what queue the packet
takes as it dumps the raw system flow tables.
id
Enter the keywords stack-unit to select a stack member ID. The
unit ID range for Z9000 is 0.
0-3
Enter the keywords port-set with a port-pipe number, 0 or 3.
NOTE: The S25 models of the S-Series have only port-pipe 0.
(OPTIONAL) Enter the keyword counters to display hit counters for
the selected ACL or QoS option.
Introduced on the Z9000.
Introduced on the S-Series.
STP BPDU Redirects
LLDP BPDU Redirects
LACP traffic Redirects
GVRP traffic Redirects
ARP Reply Redirects
802.1x frames Redirects
VRRP frames Redirects
GRAT ARP
DROP Cases
OSPF1 STUB
OSPF2 STUB
VRRP STUB
L2_DST_HIT+BC MAC+VLAN 4095
L2_DST_HIT+BC MAC
Catch all
OSPF[224.0.0.5] Packets
OSPF[224.0.0.6] Packets
VRRP Packets
BCast L2_DST_HIT on VLAN 4095 0
BCAST L2_DST_HIT Packets
Unknown L2MC Packets
#HITS
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0