Dell Force10 Z9000 Reference Manual page 677

detail
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command.
Usage This command displays the IGMP database, including configured entries for either all groups
Information on all interfaces, all groups on specific interfaces, or specific groups on specific interfaces.
The following describes the show ip igmp groups command shown in the Example
below.
Field
Group Address
Interface
Mode
Uptime
Expires
Last Reporter
Member Ports
Example
FTOS#show ip igmp groups
Total Number of Groups: 5
IGMP Connected Group Membership
Group Address Interface Mode Uptime Expires Last Reporter
225.0.0.0
Member Ports: Po 2
225.0.0.1
Member Ports: Po 2
225.0.0.2
Member Ports: Po 2
225.0.0.3
Member Ports: Po 2
225.0.0.4
Member Ports: Po 2
(OPTIONAL) Enter the keyword detail to display the IGMPv3
source information.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series and C-Series.
Expanded to support the detail option.
Description
Lists the multicast address for the IGMP group.
Lists the interface type, slot and port number.
Displays the IGMP version used.
Displays the amount of time the group has been operational.
Displays the amount of time until the entry expires.
Displays the IP address of the last host to be a member of the IGMP
group.
Indicates the port channel. If the port channel is VLT, an asterisk (*)
after the port channel number indicates the port channel is locally
down and that a remote VLT port is up.
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
677