Name - Dell Force10 Z9000 Reference Manual

Example
The bold lines show enabling VLAN output reveals the output statistics counters for the VLAN.
FTOS(conf)#enable vlan-output-counters
FTOS(conf)#exit
FTOS#show interface vlan 101
Vlan 101 is down, line protocol is down
Address is 00:01:e8:26:e0:5b, Current address is
00:01:e8:26:e0:5b
Interface index is 1107787877
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 1000 Mbit
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 01:12:44
Queueing strategy: fifo
Input Statistics:
Output Statistics:
Time since last interface status change: 01:12:44
FTOS#
FTOS#show interfaces vlan 1
Vlan 1 is down, line protocol is down
Address is 00:01:e8:13:a5:aa, Current address is
00:01:e8:13:a5:aa
Interface index is 1107787777
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 1000 Mbit
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 01:36:01
Queueing strategy: fifo
Input Statistics:
Output Statistics:
Time since last interface status change: 01:36:01
FTOS#

name

Assign a name to the VLAN.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name
Defaults Not configured.
Command Modes INTERFACE VLAN
0 packets, 0 bytes
0 packets, 0 bytes
100000 packets, 10000000 bytes
200000 packets, 20800000 bytes
Enter up to 32 characters as the name of the VLAN.
941