Show Ip Route List - Dell Force10 Z9000 Reference Manual

R
> R 100.10.10.0/24
C
> R 101.10.10.0/24
FTOS#
Example
FTOS#show ip route summary
(Summary)
Route Source
connected
static
Total
Total 3 active route(s) using 612 bytes
R1_E600i>show ip route static ?
|
<cr>
R1_E600i>show ip route static
----------- ------- ----------- -----------
*S
FTOS>

show ip route list

Display IP routes in an IP prefix list.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip route list prefix-list
Parameters
prefix-list
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Example
FTOS#show ip route list test
3.0.0.0/8 via 100.10.10.10, So 2/8 120/1
via 101.10.10.10, So 2/9
100.10.10.0/24 Direct, So 2/8
Direct, So 2/8
101.10.10.0/24 Direct, So 2/9
Direct, So 2/9
Active Routes
2
1
3
Destination Gateway
0.0.0.0/0 via 10.10.91.9, Gi 1/2
Enter the name of a configured prefix list.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Non-active Routes
0
0
0
Pipe through a command
Dist/Metric Last Change
00:07:12
0/0 00:08:54
120/0 00:08:54
0/0 00:09:15
120/0 00:09:15
1/0 3d2h
825