Gvrp Registration - Dell Force10 Z9000 Reference Manual

gvrp registration

Configure the GVRP register type.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax gvrp registration {fixed | normal | forbidden}
To return to the default, use the gvrp register normal command.
Parameters
fixed
normal
forbidden
Defaults normal
Command Modes CONFIGURATION-INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Usage
Fixed registration prevents an interface, configured using the command line, to belong to a
Information
VLAN (static configuration) from being unconfigured when it receives a Leave message.
Therefore, Registration mode on that interface is fixed.
Normal registration is the default registration. The port's membership in the VLAN depends on
GVRP. The interface becomes a member of a VLAN after learning about the VLAN through
GVRP. If the VLAN is removed from the port that sends GVRP advertisements to this device, the
port stops being a member of the VLAN.
Use the forbidden command when you do not want the interface to advertise or learn about
VLANs through GVRP.
Related show gvrp
Commands
654
Enter the keyword fixed followed by the VLAN range in a comma
separated VLAN ID set.
Enter the keyword normal followed by the VLAN range in a comma
separated VLAN ID set. This is the default.
Enter the keyword forbidden followed by the VLAN range in a
comma separated VLAN ID set.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
– displays the GVRP configuration including the registration.