Ip Pim Bsr-Candidate - Dell Force10 Z9000 Reference Manual

ip pim bsr-candidate

Configure the PIM router to join the Bootstrap election process.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip pim bsr-candidate interface [hash-mask-length] [priority]
To return to the default value, use the no ip pim bsr-candidate command.
Parameters
interface
hash-mask-
length
priority
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 6.1.1.0
1132
Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
(OPTIONAL) Enter the hash mask length. The range is zero (0) to 32.
The default is 30.
(OPTIONAL) Enter the priority used in Bootstrap election process. The
range is zero (0) to 255. The default is zero (0).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Added support for the VLAN interface.