Debug Ip Bgp Ipv6 Unicast Updates; Distance Bgp - Dell Force10 Z9000 Reference Manual

debug ip bgp ipv6 unicast updates

View information about BGP updates.
E-Series
Syntax debug ip bgp ipv6 unicast ipv6-address prefix-length updates
[in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-address
prefix-length updates [in | out] command.
Parameters
ipv6-address
prefix-length
updates
in
out
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version 7.4.1.0

distance bgp

Define an administrative distance for routes.
E-Series
Syntax distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance
internal-distance
local-distance
Defaults
518
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter the keyword updates to view BGP update information.
(OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
(OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Introduced
Enter a number to assign to routes learned from a neighbor external
to the AS. The range is 1 to 255. The default is 20.
Enter a number to assign to routes learned from a router within the
AS. The range is 1 to 255. The default is 200.
Enter a number to assign to routes learned from networks listed in the
network command. The range is 1 to 255. The default is 200.
• external-distance = 20