Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.2.1.0
Commands to Configure Secure DHCP
DHCP, as defined by RFC 2131, provides no authentication or security mechanisms. Secure DHCP is a suite of features
that protects networks that use dynamic address allocation from spoofing and attacks.
arp inspection
Enable dynamic arp inspection (DAI) on a VLAN.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
arp inspection
Defaults
Disabled
Command Modes
INTERFACE VLAN
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 8.2.1.0
Related
arp inspection-trust
Commands
the binding table.
arp inspection-trust
Specify a port as trusted so that ARP frames are not validated against the binding table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
arp inspection-trust
Defaults
Disabled
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
– specifies a port as trusted so that ARP frames are not validated against
•
INTERFACE
•
INTERFACE PORT-CHANNEL
Introduced on the Z9000.
Introduced on the S4810.
599