Show Cam-Profile - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

VmanDualQos:

show cam-profile

Display the details of the CAM profiles on the chassis and all line cards.

show cam-profile [profile microcode microcode | summary]

(OPTIONAL) Choose a single CAM profile to display:

Enter the keyword default to specify the default CAM

Enter the keywords eg-default to specify the default

CAM profile for EG (dual-CAM) line cards.

Enter the keywords ipv4-320k to specify the CAM profile

that provides 320K entries for the IPv4 FIB.

Enter the keywords ipv4-egacl-16k to specify the CAM

profile that provides 16K entries for egress ACLs.

Enter the keywords ipv6-extacl to specify the CAM

profile that provides IPv6 functionality.

Enter the keywords l2-ipv4-inacl to specify the CAM

profile that provides 32K entries for ingress ACLs.

Enter the keywords unified-default to specify the

CAM profile that maintains the CAM allocations for the IPv6

and IPv4 FIB while allocating more CAM space for the

Ingress and Egress Layer 2 ACL and IPv4 ACL regions.

Enter the keywords ipv4-vrf to specify the CAM profile

that maintains the CAM allocations for the IPv4 FIB while

allocating CAM space for VRF.

Enter the keywords ipv4-v6-vrf to specify the CAM

profile that maintains the CAM allocations for the IPv4 and

IPv6FIB while allocating CAM space for VRF.

Enter the keywords ipv4-64k-ipv6 to specify the CAM

profile that provides an alternate to ipv6-extacl that

redistributes CAM space from the IPv4FIB to IPv4Flow and

Choose a microcode based on the CAM profile you chose. Not all

microcodes are available to be paired with a CAM profile.

Enter the keyword default to select the microcode that

distributes CAM space for a typical deployment.

Enter the keywords lag-hash-align to select the

microcode for applications that require the same hashing for

bi-directional traffic.