Lacp System-Priority - Dell Force10 Z9000 Reference Manual

Parameters
priority-value
Defaults 32768
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1

lacp system-priority

Configure the LACP system priority.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax lacp system-priority priority-value
Parameters
priority-value
Defaults 32768
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
910
Enter the port-priority value. The higher the value number, the lower
the priority. The range is 1 to 65535. The default is 32768.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the port-priority value. The higher the value number, the lower
the priority. The range is 1 to 65535. The default is 32768.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.