Member-Vlan; Mode - Dell Force10 Z9000 Reference Manual

member-vlan

Specify the member VLAN identification numbers.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax member-vlan {vlan-range}
To return to the default, use the no member-vlan [vlan-range] command.
Parameters
vlan-range
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0

mode

Set the Master or Transit mode of the ring.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mode {master | transit}
To reset the mode, use the no mode {master | transit} command.
Parameters
master
transit
Defaults Mode None
Command Modes CONFIGURATION (conf-frrp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
644
Enter the member VLANs using VLAN IDs (separated by commas), a
range of VLAN IDs (separated by a hyphen), a single VLAN ID, or a
combination. For example: VLAN IDs (comma-separated): 3, 4, 6.
Range (hyphen-separated): 5-10. Combination: 3, 4, 5-10, 8.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Enter the keyword master to set the Ring node to Master mode.
Enter the keywordtransit to set the Ring node to Transit mode.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.