Debug Ip Bgp Dampening - Dell Force10 Z9000 Reference Manual

notifications
soft-
reconfiguration
updates
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 7.8.1.0
Version 7.7.1.0
Usage
To view information on both incoming and outgoing routes, do not include the in and out
Information
parameters in the debugging command. The in and out parameters cancel each other; for
example, if you enter the debug ip bgp in command and then enter the debug ip
bgp out command, you will not see information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
debug ip bgp events
Commands
debug ip bgp keepalives
debug ip bgp notifications
debug ip bgp updates
show debugging

debug ip bgp dampening

View information on routes being dampened.
C-Series, E-Series TeraScale, Z-Series, S-Series
Syntax debug ip bgp ipv4 multicast dampening
To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
352
Enter the keyword notifications to view BGP notifications.
Enter the keywords soft-reconfiguration to view only
information on inbound BGP soft reconfiguration.
Enter the keyword updates to view BGP updates.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
– views information about BGP events.
– views information about BGP keepalives.
– views information about BGP notifications.
– views information about BGP updates.
– views enabled debugging operations.
Enter the keyword dampening to clear route flap dampening
information.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced IPv6 MGBP support for the E-Series.