Ip Dhcp Snooping Database - Dell Force10 Z9000 Reference Manual

interface
slot/port
lease
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 8.3.1.0
Version 7.8.1.0
Related show ip dhcp snooping
Commands

ip dhcp snooping database

Delay writing the binding table for a specified time.
C-Series, E-Series, S-Series, Z-Series
Syntax ip dhcp snooping database write-delay minutes
Parameters
minutes
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
602
type
Enter the keyword interface followed by the type of interface to
which the host is connected:
•
•
•
•
•
Enter the slot and port number of the interface.
time Enter the keyword lease followed by the amount of time the IP
address will be leased. The range is 1 to 4294967295.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
– displays the contents of the DHCP binding table.
The range is 5 to 21600.
Introduced on the Z9000.
For an 10/100 Ethernet interface, enter the keyword
fastethernet.
For a Gigabit Ethernet interface, enter the keyword
gigabitethernet.
For a SONET interface, enter the keyword sonet.
For a Ten Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.