show ipv6 prefix-list
Displays the specified IPv6 prefix list.
Z-Series
Syntax
show ipv6 prefix-list detail {prefix-list name} | summary
Parameters
detail
prefix-list name
summary
Command Modes
EXEC
Command History
Version 9.0.0.0
Version 8.3.10.0
Related
ipv6
Commands
timers bgp
Allows you to adjust the BGP network timers for all neighbors.
C-Series, E-Series
Syntax
timers bgp keepalive holdtimer
To return to the default values, use the no timers bgp command.
Parameters
keepalive
holdtimer
Defaults
Command Modes
ROUTER BGP
Command History
Version 8.2.1.0
Version 7.4.1.0
512
Display a detailed description of the selected IPv6 prefix list.
Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list names.
Display a summary of RPF routes.
Introduced on the Z9000.
Introduced on the S4810.
prefix-list– configures an IPv6 prefix-list.
Enter the time interval in seconds between which the E-Series sends
keepalive messages. The range is 1 to 65535. The default is 60
seconds.
Enter the time interval in seconds which the E-Series waits since the
last keepalive message before declaring a BGP peer dead. The range
is 3 to 65535. The default is 180 seconds.
•
keepalive = 60 seconds
•
holdtimer = 180 seconds
Introduced on the E-Series ExaScale.
Introduced