Debug Ip Bgp Soft-Reconfiguration; Debug Ip Bgp Updates - Dell Force10 Z9000 Reference Manual

debug ip bgp soft-reconfiguration

Enable soft-reconfiguration debug.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug ip bgp {ip-address | peer-group-name} soft-
reconfiguration
To disable, use the no debug ip bgp {ip-address | peer-group-name}
soft-reconfiguration command.
Parameters
ip-address
peer-group-name
Defaults Disabled
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.2.1.0
Usage
This command turns on BGP soft-reconfiguration inbound debugging. If no neighbor is
Information
specified, debug turns on for all neighbors.

debug ip bgp updates

Allows you to view information about BGP updates.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug ip bgp updates [in | out | prefix-list prefix-list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] updates [in | out] command.
Parameters
in
out
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
(OPTIONAL) Enter the name of the peer group to disable or enable all
routers within the peer group..
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
(OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
(OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
355