Dell Force10 Z9000 Reference Manual page 443

Usage
The following describes the sho ip bgp ipv4 multicast summary command
Information
shown in the Example below.
Field
BGP router identifier
BGP table version
network entries
BGP path attribute
entries
BGP AS-PATH
entries
BGP community
entries
Dampening enabled
Neighbor
AS
MsgRcvd
MsgSent
TblVer
InQ
OutQ
Up/Down
State/Pfxrcd
Description
Displays the local router ID and the AS number.
Displays the BGP table version and the main routing table version.
Displays the number of network entries, route paths, and the amount
of memory used to process those entries.
Displays the number of BGP path attributes and the amount of
memory used to process them.
Displays the number of BGP AS_PATH attributes processed and the
amount of memory used to process them.
Displays the number of BGP COMMUNITY attributes processed and
the amount of memory used to process them. The show ip bgp
community command provides more details on the COMMUNITY
attributes.
Displayed only when you enable dampening. Displays the number of
paths designated as history, dampened, or penalized.
Displays the BGP neighbor address.
Displays the AS number of the neighbor.
Displays the number of BGP messages that neighbor received.
Displays the number of BGP messages that neighbor sent.
Displays the version of the BGP table that was sent to that neighbor.
Displays the number of messages from that neighbor waiting to be
processed.
Displays the number of messages waiting to be sent to that neighbor.
If a number appears in parentheses, the number represents the
number of messages waiting to be sent to the peer group.
Displays the amount of time (in hours:minutes:seconds) that the
neighbor is in the Established stage. If the neighbor has never moved
into the Established stage, the word never is displayed.
If the neighbor is in Established stage, the number of network
prefixes received.
If a maximum limit was configured with the neighbor maximum-
prefix command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is
displayed (Idle, Connect, Active, OpenSent, OpenConfirm). When the
peer is transitioning between states and clearing the routes
received, the phrase (Purging) may appear in this column.
443