Debug Ip Bgp; Debug Ip Bgp Ipv6 Dampening - Dell Force10 Z9000 Reference Manual

debug ip bgp

Allows you to view all information on BGP, including BGP events, keepalives, notifications, and updates.
C-Series, E-Series
Syntax debug ip bgp [ipv6-address | peer-group peer-group-name] [in |
out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
ipv6-address
peer-group
group-name
in
out
Command Modes EXEC Privilege
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
To view information on both incoming and outgoing routes, do not include the in and out
Information
parameters in the debugging command. The in and out parameters cancel each other; for
example, if you enter debug ip bgp in and then enter debug ip bgp out, you will
not see information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands

debug ip bgp ipv6 dampening

View information on IPv6 routes being dampened.
C-Series, E-Series
Syntax debug ip bgp ipv6 unicast dampening [in | out]
472
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-
Enter the keywords peer-group followed by the name of the peer
group.
(OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
(OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
Introduced on the E-Series ExaScale.
Introduced
• debug ip bgp events – view information about BGP events.
• debug ip bgp keepalives
• debug ip bgp notifications
• debug ip bgp updates – view information about BGP updates.
– view information about BGP keepalives.
– view information about BGP notifications.