Show Buffer-Profile Stack-Unit - Dell Force10 Z9000 Reference Manual

show buffer-profile stack-unit

Displays the global buffer profile.
S4810, Z-Series
Syntax show buffer-profile stack-unit stack unit number
Parameters
stack unit number
Defaults Dynamic
Command Modes CONFIGURATION
Command History
Version 8.3.11.4
Example (S4810)
FTOS#show buffer-profile stack-unit
Stack-Unit
---------- ---------------------- ------------------------
0 Default
1 Default
Example (Z9000)
FTOS#show buffer-profile stack-unit
Stack-Unit
---------- ---------------------- ------------------------
0 Default
show buffer-profile
Display the buffer profile that is applied to an interface.
C-Series, S-Series
Syntax show buffer-profile {detail | summary} {csf | fp-uplink}
Parameters
detail
summary
csf
fp-uplink
Defaults none
Command Modes INTERFACE
Command History
Version 7.7.1.0
Enter the stack unit number. The range is 0 to 11. For the Z9000, only
stack-unit 0 is supported.
Introduced on the Z9000.
Current Buffer-Profile Next-Boot Buffer-Profile
(Dynamic)
(Dynamic)
Current Buffer-Profile Next-Boot Buffer-Profile
(Dynamic)
Display the buffer allocations of the applied buffer profiles.
Display the buffer-profiles that are applied to line card port-pipes in
the system.
Display the Switch Fabric Processor buffer profiles that you have
applied to line card port-pipes in the system.
Display the Field Processor buffer profiles that you have applied to
line card port-pipes in the system.
Introduced on the S-Series.
Default (Dynamic)
Default (Dynamic)
Default (Dynamic)
577