Dot1X Quiet-Period; Dot1X Reauthentication - Dell Force10 Z9000 Reference Manual

Version 7.4.1.0
Usage The authenticator completes authentication only when port-control is set to auto.
Information

dot1x quiet-period

Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
C-Series, E-Series, S-Series, S4810
Syntax dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds
Defaults 60 seconds
Command Modes INTERFACE
Command History
Version 8.3.12.0
Version 7.6.1.0
Version 7.4.1.0

dot1x reauthentication

Enable periodic reauthentication of the client.
C-Series, E-Series, S-Series, S4810
Syntax dot1x reauthentication [interval seconds]
To disable periodic reauthentication, use the no dot1x reauthentication command.
Parameters
interval
Defaults 3600 seconds (1 hour)
Command Modes INTERFACE
Introduced on the E-Series.
Enter the number of seconds. The range is 1 to 65535. The default is
60.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
seconds
(Optional) Enter the keyword interval followed by the interval
time, in seconds, after which reauthentication is initiated. The range
is 1 to 31536000 (one year). The default is 3600 (1 hour).
203