Dell Force10 Z9000 Reference Manual page 688

vrrp [[ipv6]
vrrp [vrf
learning-limit
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.4.1.0
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Example
FTOS#clear counters
Clear counters on all interfaces [confirm]
Related
mac learning-limit
Commands
disallow station move on learnt MACs.
show interfaces
688
• For the management interface on the RPM, enter the keyword
ManagementEthernet followed by slot/port information.
The slot range is 0 to 1 and the port range is 0.
• For a SONET interface, enter the keyword sonet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
vrid ]
(OPTIONAL) Enter the keyword vrrp to clear the counters of all
VRRP groups. To clear the counters of VRRP groups on all IPv6
interfaces, enter ipv6. To clear the counters of a specified group,
enter a VRID number from 1 to 255.
instance ]
(OPTIONAL) E-Series only: Enter the keyword vrrp to clear counters
for all VRRP groups. To clear the counters of VRRP groups in a
specified VRF instance, enter the name of the instance (32 characters
maximum). IPv6 VRRP groups are not supported.
(OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC learning
limit is configured on the interface.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Added support (E-Series only) for VRRP groups in a VRF instance.
Introduced on the S4810.
Added support for 4093 VLANs on the E-Series ExaScale. Prior to the
release, 2094 was supported.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Updated the definition of the learning-limit option for clarity.
– allows aging of MACs even though a learning-limit is configured or
– displays information on the interfaces.