Passive-Interface - Dell Force10 Z9000 Reference Manual

Parameters
transition
Defaults Disabled
Command Modes CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6
Command History
Version 8.3.12.0
Version 7.8.1.0
net
Use this mandatory command to configure an IS-IS network entity title (NET) for a routing process. If you did not
configure a NET, the IS-IS process does not start.
E-Series, S4810
Syntax net network-entity-title
To remove a net, use the no net network-entity-title command.
Parameters
network-entity-
title
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
Version 8.3.12.0

passive-interface

Suppress routing updates on an interface. This command stops the router from sending updates on that interface.
E-Series, S4810
Syntax passive-interface interface
To delete a passive interface configuration, use the no passive-interface
interface command.
888
Introduced on the S4810.
Introduced.
Specify the area address and system ID for an IS-IS routing process.
The first 1 to 13 bytes identify the area address. The next 6 bytes
identify the system ID. The last 1 byte is the selector byte, always
identified as zero zero (00). This argument can be applied to an
address or a name.
Introduced on the S4810.