Bgp Add-Path - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)
Hide thumbs Also See for Force10 Z9000:
Table of Contents

Advertisement

suppress-map
map-name
Defaults
Not configured.
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage
At least one of the routes included in the aggregate address must be in the BGP routing table
Information
for the configured aggregate to become active.
If routes within the aggregate are constantly changing, do not add the as-set parameter to
the aggregate as the aggregate flaps to keep track of the changes in the AS_PATH.
In route maps used in the suppress-map parameter, routes meeting the deny clause are
not suppress; in other words, they are allowed. The opposite is also true: routes meeting the
permit clause are suppressed.
If the route is injected via the network command, that route still appears in the routing table
if the summary-only parameter is configured in the aggregate-address command.
The summary-only parameter suppresses all advertisements. If you want to suppress
advertisements to only specific neighbors, use the neighbor distribute-list
command.
In the show ip bgp command, aggregates contain an 'a' in the first column and routes
suppressed by the aggregate contain an 's' in the first column.

bgp add-path

Allow the advertisement of multiple paths for the same address prefix without the new paths replacing any previous
ones.
E-Series, Z-Series, S4810
Syntax
bgp add-path [send | receive | both] path-count
Parameters
send
receive
both
(OPTIONAL) Enter the keywords suppress-map followed by the
name of a configured route map to identify which more-specific
routes in the aggregate are suppressed.
ROUTER BGP ADDRESS FAMILY
ROUTER BGP ADDRESS FAMILY IPv6
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the keyword send to indicate that the system will send multiple
paths to peers.
Enter the keyword receive to indicate that the system will accept
multiple paths from peers.
Enter the keyword both to indicate that the system will send and
accept multiple paths from peers.
331

Advertisement

Table of Contents
loading

Table of Contents