Show Ip Flow - Dell Force10 Z9000 Reference Manual

show ip flow

Show how a Layer 3 packet is forwarded when it arrives at a particular interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip flow interface [vrf vrf instance] interface {source-ip
address destination-ip address} {protocol number [tcp | udp] |
icmp} {src-port number destination-port number}
Parameters
vrf instance
interface
interface
source-ip
address
destination-ip
address
protocol
[tcp | udp] | icmp
src-port
destination-port
number
Command Modes EXEC
Command History
Version 8.3.11.1
Version 8.3.10.0
Version 8.5.1.0
Version 8.1.1.0
Version 7.9.1.0
816
E-Series Only: Show only the L3 flow as they apply to that VRF
process.
Enter the keyword
keywords.
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
(OPTIONAL) Enter an in or out parameter in conjunction
with the optional interface.
Enter the keywords source-ip followed by the IP source address
in IP address format.
Enter the keywords destination-ip followed by the IP
destination address in IP address format.
number
E-Series only: Enter the keyword protocol followed by one of the
protocol type keywords: tcp, udp, icmp, or protocol number.
number
Enter the keywords
Enter the keywords
number.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
interface followed by of the following interface
src-port followed by the source port number.
destination-port followed by the destination port