Default-Information Originate - Dell Force10 Z9000 Reference Manual

default-information originate

Configure the FTOS to generate a default external route into an OSPF routing domain.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always
metric
value
metric-type
value
route-map
name
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related redistribute
Commands
(OPTIONAL) Enter the keyword always to specify that default route
information must always be advertised.
metric-
(OPTIONAL) Enter the keyword metric followed by a number to
configure a metric value for the route. The range is 1 to 16777214.
type-
(OPTIONAL) Enter the keywords metric-type followed by an
OSPF link state type of 1 or 2 for default routes. The values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
map-
(OPTIONAL) Enter the keywords route-map followed by the name
of an established route map.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– redistributes routes from other routing protocols into OSPF.
1045