Ip Igmp Last-Member-Query-Interval - Dell Force10 Z9000 Reference Manual

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
E-Series legacy
command
Usage Querier normally sends a certain number of group-specific queries when a leave message is
Information received for a group prior to deleting a group from the membership database. There may be
situations when you require immediate deletion of a group from the membership database. This
command provides a way to achieve the immediate deletion. In addition, this command
provides a way to enable immediate-leave processing for specified groups.

ip igmp last-member-query-interval

Change the last member query interval, which is the Max Response Time inserted into Group-Specific Queries sent in
response to Leave Group messages. This interval is also the interval between Group-Specific Query messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip igmp last-member-query-interval milliseconds
To return to the default value, use the no ip igmp last-member-query-interval
command.
Parameters
milliseconds
Defaults 1000 milliseconds
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
E-Series legacy
command
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the number of milliseconds as the interval. The range is 100 to
65535. The default is 1000 milliseconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
671