Mac Accounting Destination - Dell Force10 Z9000 Reference Manual

vlan
Command Modes EXEC Privilege
Command History
Version 8.3.12.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.1

mac accounting destination

Configure a destination counter for Layer 2 traffic.
E-Series
Syntax mac accounting destination {mac-address vlan vlan-id | vlan}
[bytes | packets]
To delete a destination counter, use the no mac accounting destination command.
Parameters
mac-address
vlan
bytes
packets
916
•
•
•
•
vlan-id
Enter the keyword vlan followed by a VLAN ID number from 1 to
4094.
Added support for sticky MAC addresses.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the MAC address in the nn:nn:nn:nn:nn:nn format to count Layer
2 packets or bytes sent to that MAC address.
vlan-id
Enter the keyword vlan followed by the VLAN ID to count Layer 2
packets or bytes sent to the VLAN. The range is 1 to 4094.
(OPTIONAL) Enter the keyword bytes to count only bytes.
(OPTIONAL) Enter the keyword packets to count only packets.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.