events
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Example
FTOS#debug spanning-tree mstp bpdu gigabitethernet 2/0 ?
in Receive (in)
out Transmit (out)
description
Enter a description of the multiple spanning tree.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults
none
Command Modes
SPANNING TREE (The prompt is "config-mstp".)
Command History
Version 8.3.11.1
pre-7.7.1.0
Related
protocol spanning-tree mstp
Commands
992
•
For Transmit, enter the keyword out.
(OPTIONAL) Enter the keyword events to debug MSTP events.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a description to identify the multiple spanning tree (maximum 80
characters).
Introduced on the Z9000.
Introduced
– enters MULTIPLE SPANNING TREE mode on the switch.