Version 7.4.1.0
Usage
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
Information
default-metric
Allows you to change the metrics of redistributed routes to locally originated routes. Use this command with the
redistribute command.
C-Series, E-Series
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number
Defaults
0
Command Modes
ROUTER BGP
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED)
Information
attribute for redistributed routes only.
Related
Commands
description
Enter a description of the BGP routing protocol.
C-Series, E-Series
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults
none
Command Modes
ROUTER BGP
Command History
Version 8.2.1.0
476
Introduced
Enter a number as the metric to be assigned to routes from other
protocols. The range is 1 to 4294967295.
Introduced on the E-Series ExaScale.
Introduced
•
bgp always-compare-med
•
redistribute
– redistributes routes from other routing protocols into BGP.
Enter a description to identify the BGP protocol (80 characters
maximum).
Introduced on the E-Series ExaScale.
– enables comparison of all BGP MED attributes.