Dell Force10 Z9000 Reference Manual page 180

Usage Without the linecard or page option, the command output is continuous. Uuse CNTL-z to
Information interrupt the command output.
The save option works with other filtering commands. This allows you to save specific
information of a show command. The save entry must always be the last option. For example:
FTOS#show tech-support |grep regular-expression |except
regular-expression | find regular-expression | save flash://
result
This display output is an accumulation of the same information that is displayed when you
execute one of the following show commands:
Example (C-
FTOS#show tech-support page
Series)
----------- show version --------------------------
Dell Force10 Networks Real Time Operating System Software
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: FTOS 7.5.1.0
Copyright (c) 1999-2007 by Force10 Networks, Inc.
Build Time: Tue Sep 12 15:39:17 IST 2006
Build Path: /sites/maa/work/sw//C-SERIES/SW/SRC
Dell Force10 uptime is 18 minutes
System image file is "/work/sw/IMAGES/Chassis/C300-ODC-2/FTOS-
CS.bin"
Chassis Type: C300
Control Processor: IBM PowerPC 750FX (Rev D2.2) with
1073741824 bytes of memory.
128K bytes of non-volatile configuration memory.
(CB)
180
•
show cam-profile
•
show cam-ipv4flow
•
show chassis
•
show clock
•
show environment
•
show file-system
•
show interface
•
show inventory
•
show ip management-route
•
show ip protocols
•
show ip route summary
•
show processes cpu
•
show processes memory
•
show redundancy
•
show rpm
•
show running-conf
•
show sfm
•
show version
1 Route Processor/Switch Fabric Module
2 48-port GE 10/100/1000Base-T line card with RJ45 interface
1 FastEthernet/IEEE 802.3 interface(s)