Show Mac Cam - Dell Force10 Z9000 Reference Manual

show mac cam

Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
E-Series
Syntax show mac cam
Command Modes
Command History
pre-Version
6.2.1.1
Usage The following describes the show mac cam command shown in the Example below.
Information
Field
Slot
Type
MAC CAM Size
MAC FIB Entries
MAC ACL Entries
Example
FTOS#show mac cam
Slot Type
11
Note: All CAM entries are per portpipe.
FTOS#
Related show mac-address-table
Commands
936
• EXEC
• EXEC Privilege
Introduced on the E-Series.
Description
Lists the active line card slots.
Lists the type of line card present in the slot.
Displays the total CAM size available.
Displays the amount and percentage of CAM available for MAC
addresses.
Displays the amount and percentage of CAM available for MAC
ACLs.
MAC CAM Size
0 E24PD 64K entries
2 E24PD2 128K entries
EX2YD 64K entries
– displays the current MAC address configuration.
NOTE: A portion of the MAC CAM is used for system operations;
therefore, adding the MAC FIB and MAC ACL is less than the
MAC CAM.
MAC FIB Entries
48K (75%)
64K (50%)
16K (25%)
MAC ACL Entries
8K (25%)
32K (50%)
24K (75%)