Dell Force10 Z9000 Reference Manual page 935

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

Command Modes

Command History

Version 8.5.1.0

Version 8.3.7.0

MAC Accounting information can be accessed using SNMP via the Force10 Monitor MIB. For

more information about enabling SNMP, refer to the

FTOS-1#sh mac accounting destination interface gigabitethernet

00:44:00:00:00:02

00:44:00:00:00:01

00:22:00:00:00:00

00:44:00:00:00:02

00:44:00:00:00:01

show mac accounting access-list

(if configured).

(OPTIONAL) Enter the keyword interface followed by the

interface type, slot and port information:

(OPTIONAL) Enter the keyword vlan followed by the VLAN ID to

display the MAC address assigned to the VLAN. The range is 1 to

EXEC Privilege

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Introduced on the E-Series.

NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an

increasing order using SNMP. As a workaround, you can use the -C c option in

snmpwalk or snmpbulkwalk to access the Force10 MONITOR MIB. For example: %

snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet followed by the slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet followed by the slot/port

information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE followed by the slot/port information.

FTOS Configuration Guide .

Packets Bytes

– displays the MAC access list configurations and counters