Show Ip Fib Stack-Unit - Dell Force10 Z9000 Reference Manual

Field
Mac-Addr
Port
VId
Index
EC
Example
FTOS>show ip fib linecard 12
Destination
Port
---------------------------------------------------------------
-----------------
3.0.0.0/8
00:01:e8:00:03:ff So 2/8 0 60260 0
3.0.0.0/8
00.10.10.0/24
00:01:e8:00:03:ff So 2/8 0 11144 0
100.10.10.1/32
00:00:00:00:00:00 CP
100.10.10.10/32 via 100.10.10.10, So 2/8 100.10.10.10
00:01:e8:00:03:ff So 2/8 0 0
101.10.10.0/24
00:00:00:00:00:00 RP2
101.10.10.1/32
00:00:00:00:00:00 CP
101.10.10.10/32 via 101.10.10.10, So 2/9 101.10.10.10
00:01:e8:01:62:32 So 2/9 0 1
FTOS>
Related clear ip fib linecard
Commands

show ip fib stack-unit

View all FIB entries.
S-Series, Z-Series
Syntax show ip fib stack-unit id [ip-address [mask] [longer-prefixes]
| summary]
Parameters
id
ip-address mask
814
Description
Displays the MAC address.
Displays the egress-port information.
Displays the VLAN ID. If no VLAN is assigned, zero (0) is listed.
Displays the internal interface number.
Displays the number of ECMP paths.
Gateway
VId Index EC
via 100.10.10.10, So 2/8 100.10.10.10
via 101.10.10.10, So 2/9
Direct, So 2/8 0.0.0.0
via 127.0.0.1 127.0.0.1
Direct, So 2/9 0.0.0.0
via 127.0.0.1 127.0.0.1
– clears the FIB entries on a specified line card.
Enter the S-Series stack unit ID.
The range is 0 to 7.
(OPTIONAL) Enter the IP address of the network destination to view
only information on that destination. Enter the IP address in dotted
decimal format (A.B.C.D). You must enter the mask in slash prefix
format (/X).
First-Hop
0 3276 0
0
0 11145 0
0 3277 0
0
Mac-Addr