Set Local-Preference - Dell Force10 Z9000 Reference Manual

stub-area
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related
set automatic-tag
Commands
set metric
set metric-type
set tag

set local-preference

Configure a filter to set the BGP LOCAL_PREF attribute for routers within the local autonomous system.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax set local-preference value
To delete a BGP LOCAL_PREF attribute, use the no set local-preference command.
Parameters
value
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Enter the keyword stub to redistributed matched routes to OSPF
stub areas.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– computes the tag value of the route.
– specifies the metric value assigned to redistributed routes.
– specifies the metric type assigned to redistributed routes.
– specifies the tag assigned to redistributed routes.
Enter a number as the LOCAL_PREF attribute value. The range is 0 to
4294967295.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
297