Ip Msdp Default-Peer - Dell Force10 Z9000 Reference Manual

Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.4.1.0
Related show ip msdp sa-cache rejected-sa
Commands

ip msdp default-peer

Define a default peer from which to accept all source-active (SA) messages.
E-Series, Z-Series, S4810
Syntax ip msdp default-peer peer address [list name]
To remove the default peer, use the no ip msdp default-peer {peer address}
list name command.
Parameters
peer address
list
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.4.1.0
Usage If a list is not specified, all SA messages received from the default peer are accepted. You can
Information enter multiple default peer commands.
980
Introduced on the Z9000.
Introduced on the S4810.
Introduced
Enter the peer address in a dotted decimal format (A.B.C.D.)
name
Enter the keywords list name and specify a standard access list
that contains the RP address that should be treated as the default
peer. If no access list is specified, then all SAs from the peer are
accepted.
Introduced on the Z9000.
Introduced on the S4810.
Added the list option and removed the prefix-list option.
Introduced