Show Memory (C-Series And E-Series) - Dell Force10 Z9000 Reference Manual

Related
show linecard
Commands
upgrade (E-Series version)
download alt-boot-image
download alt-full-image
download alt-system-image

show memory (C-Series and E-Series)

View current memory usage on the system.
C-Series, E-Series
Syntax show memory [cp | lp slot-number | rp1 | rp2]
Parameters
cp
lp
rp1
rp2
Command Modes
Command History
Version 7.5.1.0
E-Series
Usage The output for show memory displays the memory usage of LP part (sysdlp) of the system.
Information
The sysdlp is an aggregate task that handles all the tasks running on the C-Series' and E-
Series' LP.
In FTOS Release 7.4.1.0 and higher, the total counter size (for all 3 CPUs) in show memory
(C-Series and E-Series) and show processes memory (C-Series and
E-Series) differs based on which FTOS processes are counted.
154
– view the line card status.
– upgrades the boot flash, boot selector, or system image.
– downloads an alternate boot image to the chassis.
– downloads an alternate FTOS image to the chassis.
– downloads an alternate system image to the chassis.
(OPTIONAL) Enter the keyword cp to view information on the control
processor on the RPM.
slot-number
(OPTIONAL) Enter the keyword lp and the slot number to view
information on the line-card processor in that slot. For the C-Series,
the range is 0 to 7. For the E-Series, The range is 0 to 13 on the E1200/
E1200i, 0 to 6 on the E600/E600i, and 0 to 5 on the E300..
(OPTIONAL) Enter the keyword rp1 to view information on Route
Processor 1 on the RPM.
(OPTIONAL) Enter the keyword rp2 to view information on Route
Processor 2 on the RPM.
• EXEC
• EXEC Privilege
Introduced on the C-Series.
Original command.
NOTE: This option is supported on the E-Series only.
NOTE: This option is supported on the E-Series only.