Hash-Algorithm Hg-Seed; Hash-Algorithm Seed - Dell Force10 Z9000 Reference Manual

hash-algorithm hg-seed

Select the seed value to be used in HiGig hashing.
Z-Series
Syntax [no] hash-algorithm hg-seed number | stack-unit unit number
port-set port-pipe
Parameters
hg-seed
stack-unit
number
port-set
Defaults 32-bit chassis MAC and system time
Command Modes CONFIGURATION
Command History
Version 8.3.11.4

hash-algorithm seed

Select the seed value for the ECMP, LAG, and NH hashing algorithm.
E-series, Z-Series
Syntax hash-algorithm seed value [linecard slot] [port-set number]
Parameters
seed
linecard
port-set
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.1.0
614
number Enter the keywords hg-seed followed by the hash algorithm seed
value. The range is 0 to 2147483646.
unit
Enter the keywords stack-unit followed by the stack unit number.
The range is 0 to 7.
port-pipe
Enter the keywords port-set followed by the line card's port-pipe
number. The range is 0 to 5.
Introduced on the Z9000.
value Enter the keyword seed followed by the seed value. The range is 0 to
4095.
slot
Enter the keyword linecard followed by the linecard slot number.
number
Enter the keyword port-set followed by the linecard port-pipe
number.
Introduced on Z9000.
Introduced on the E-Series.