Show Config - Dell Force10 Z9000 Reference Manual

Parameters
sequence-
number
deny
permit
any
ip-prefix /nn
ge
length
le
length
bitmask
Defaults Not configured.
Command Modes PREFIX-LIST
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.3.1.0
Usage
If you do not use the ge or le options, only packets with an exact match to the prefix are
Information
filtered.
Related
deny
Commands
permit

show config

Display the current PREFIX-LIST configurations.
C-Series, E-Series, S-Series, Z-Series
Syntax show config
Command Modes PREFIX-LIST
Command History
Version 8.3.11.1
Version 8.1.1.0
280
Enter a number. The range is 1 to 4294967294.
Enter the keyword deny to configure a filter to drop packets meeting
this condition..
Enter the keyword permit to configure a filter to forward packets
meeting this condition.
(OPTIONAL) Enter the keyword any to match any packets.
(OPTIONAL) Specify an IP prefix in the network/length format. For
example, 35.0.0.0/8 means match the first 8 bits of address 35.0.0.0.
min-prefix-
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix
length, which is a number from zero (0) to 32.
max-prefix-
(OPTIONAL) Enter the keyword le and then enter the maximum prefix
length, which is a number from zero (0) to 32.
number
Enter the keyword bitmask and then enter a bit mask number in
dotted decimal format.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Added the bit mask option.
– configures a filter to drop packets.
– configures a filter to pass packets.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.