Show Ip Bgp Ipv6 Unicast - Dell Force10 Z9000 Reference Manual

Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
If you do not configure the default-metric command in addition to the redistribute
Information
command, or there is no route map to set the metric, the metric for redistributed static and
connected is "0".
To redistribute the default route (0::0/0), configure the neighbor default-originate
command.
Related neighbor default-originate
Commands

show ip bgp ipv6 unicast

View the current BGP routing table for the E-Series.
E-Series
Syntax show ip bgp ipv6 unicast [network [network-mask] [length]]
Parameters
network
network-mask
longer-prefixes
Command Modes
Command History
Version 7.4.1.0
Usage
Field
Information
Network
•
•
•
If the route map is not configured, the default is deny (to drop all
routes).
Introduced on the E-Series ExaScale.
Introduced
– injects the default route.
(OPTIONAL) Enter the network address (in dotted decimal format) of
the BGP network to view information only on that network.
(OPTIONAL) Enter the network mask (in slash prefix format) of the
BGP network address.
(OPTIONAL) Enter the keywords
with a common prefix.
• EXEC
• EXEC Privilege
Introduced
Description
Displays the destination network prefix of each BGP route.
match ipv6 next-hop
match ipv6 route-source
set ipv6 next-hop
longer-prefixes to view all routes
527