mask
longer-prefixes
list
protocol
process-id
routing-tag
connected
all
static
summary
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.9.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
(OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
(OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
prefix-list
(OPTIONAL) Enter the keyword list and the name of a configured
prefix list. For more information, refer to the
command.
(OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf,
rip) or the keywords connected or static.
NOTE: bgp, isis, ospf, and rip are E-Series-only options.
•
•
•
(OPTIONAL) Specify that only OSPF routes with a certain process ID
must be displayed.
(OPTIONAL) Specify that only ISIS routes with a certain routing tag
must be displayed.
(OPTIONAL) Enter the keyword connected to view only the directly
connected routes.
(OPTIONAL) Enter the keyword all to view both active and non-
active routes.
(OPTIONAL) Enter the keyword static to view only routes
configured by the ip route command.
(OPTIONAL) Enter the keyword summary. For more information,
refer to the
•
EXEC
•
EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
If you enter bgp, you can include the BGP as-number (E-
Series only).
If you enter isis, you can include the ISIS routing-tag
(E-Series only)
If you enter ospf, you can include the OSPF process-id.
show ip route summary
show ip route list
command.
823