Neighbor Graceful-Restart - Dell Force10 Z9000 Reference Manual

Command History
Version 8.3.11.1
Version 7.8.1.0
Version 7.7.1.0
Usage Use the ip as-path access-list command in CONFIGURATION mode to enter AS-
Information PATH ACL mode and configure the AS-PATH filters to deny or permit BGP routes based on
information in their AS-PATH attribute.
Related ip as-path access-list
Commands

neighbor graceful-restart

Enable graceful restart on a BGP neighbor.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} graceful-restart
[restart-time seconds] [stale-path-time seconds] [role
receiver-only]
To return to the default, enter the no bgp graceful-restart command.
Parameters
ip-address
peer-group-name
restart-time
seconds
stale-path-time
seconds
role receiver-only
Defaults as above
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
366
• ROUTER BGP-address-family
Introduced on the Z9000.
Introduced on the S-Series.
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, ACL names were up to 16 characters long.
Introduced on the C-Series.
– enter AS-PATH ACL mode and configure the AS-PATH filters.
Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group to apply the filter to all routers in the
peer group.
Enter the keyword restart-time followed by the maximum
number of seconds needed to restart and bring-up all the peers. The
range is 1 to 3600 seconds. The default is 120 seconds.
Enter the keyword stale-path-time followed by the maximum
number of seconds to wait before restarting a peer's stale paths. The
default is 360 seconds.
Enter the keyword role receiver-only to designate the local
router to support graceful restart as a receiver only.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.