Terminal Xml - Dell Force10 Z9000 Reference Manual

Parameters
screen-length
Defaults 24 lines
Command Modes
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series

terminal xml

Enable XML mode in Telnet and SSH client sessions.
C-Series, E-Series
Syntax terminal xml
To exit XML mode, enter terminal no xml.
Defaults Disabled
Command Modes
Command History
Version 8.1.1.0
Version 7.7.1.0
Version 6.5.1.0
Usage This command enables the XML input mode where you can either cut and paste XML requests
Information or enter the XML requests line-by-line. For more information about using the XML feature, refer
to the XML chapter in the
188
Enter a number of lines. Entering zero causes the terminal to display
without pausing. The range is 0 to 512.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced for the E-Series.
FTOS Configuration Guide .