Show Ip Bgp Ipv6 Unicast Peer-Group - Dell Force10 Z9000 Reference Manual

Command History
Version 8.2.1.0
Version 7.4.1.0
Related show ip bgp
Commands

show ip bgp ipv6 unicast peer-group

Allows you to view information on the BGP peers in a peer group.
C-Series, E-Series
Syntax show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name
detail
summary
Command Modes
Command History
Version 8.2.1.0
Version 7.4.1.0
Example
FTOS#show ip bgp peer-group
Peer-group RR-CLIENT, remote AS 18508
Peer-group RR-CLIENT-PASSIV, remote AS 18508
FTOS#
Introduced on the E-Series ExaScale.
Introduced
– view the current BGP routing table.
(OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
(OPTIONAL) Enter the keyword detail to view peer-group-specific
information for the IPv6 address family.
(OPTIONAL) Enter the keyword summary to view status information
of the peers in that peer group. The output is the same as that found
in show ip bgp summary command
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
BGP version 4
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP neighbor is RR-CLIENT, peer-group internal,
Number of peers in this group 1
Peer-group members (* - outbound optimized):
9000::4:
BGP version 4
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP neighbor is RR-CLIENT-PASSIV, peer-group internal,
Number of peers in this group 1
Peer-group members (* - outbound optimized):
9000::9:2*
507