Show Ip Ospf Database Network - Dell Force10 Z9000 Reference Manual

Options: (No TOS-capability, DC)
LS type: Type-5 AS External
Link State ID: 24.216.12.0
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000005
Checksum: 0xa00e
Length: 36
Network Mask: /24
FTOS#
Related show ip ospf database
Commands

show ip ospf database network

Display the network (type 2) LSA information.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip ospf process-id database network [link-state-id] [adv-
router ip-address]
Parameters
process-id
link-state-id
adv-router
address
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
1080
Metrics Type: 2
TOS: 0
Metrics: 1
Forward Address: 0.0.0.0
External Route Tag: 701
– displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no Process
ID is entered, command applies only to the first OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID
value depends on the LSA type, and it can be one of the following:
•
•
•
ip-
(OPTIONAL) Enter the keywords adv-router and the ip-address to
display only the LSA information about that router.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
the network's IP address for Type 3 LSAs or Type 5 LSAs
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
the default destination (0.0.0.0) for Type 5 LSAs