Neighbor X:x:x::x Password; Neighbor Next-Hop-Self - Dell Force10 Z9000 Reference Manual

Version 7.4.1.0
Usage If you configure the neighbor maximum-prefix command and the neighbor receives
Information more prefixes than allowed by the neighbor maximum-prefix command configuration,
the neighbor goes down and the show ip bgp summary command displays (
State/PfxRcd column for that neighbor. The neighbor remains down until you enter the clear
ip bgp command for the neighbor or the peer group to which the neighbor belongs or you
enter the neighbor shutdown and neighbor no shutdown commands.
Related show ip bgp summary
Commands

neighbor X:X:X::X password

Enable TCP MD5 Authentication for an IPv6 BGP peer session.
C-Series, E-Series
Syntax neighbor x:x:x::x password {7 <encrypt-pass>|<clear-pass>
To return to the default setting, use the no neighbor x:x:x::x password command.
Parameters
encrypt-pass
clear-pass
Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Usage The TCP session is authentication and hence prevents the data from being compromised.
Information

neighbor next-hop-self

Allows you to configure the router as the next hop for a BGP neighbor. (This command is used for IBGP).
C-Series, E-Series
Syntax neighbor {ipv6-address | peer-group-name} next-hop-self
To return to the default setting, use the no neighbor {ipv6-address | peer-
group-name} next-hop-self command.
Parameters
ipv6-address
peer-group-name
486
Introduced
– displays the current BGP configuration.
Enter the encrypted password.
Enter the clear text password.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
(OPTIONAL) Enter the name of the peer group.
prfxd ) in the