Show Mac Accounting Access-List - Dell Force10 Z9000 Reference Manual

show mac accounting access-list

Display MAC access list configurations and counters (if configured).
C-Series, E-Series, S-Series, Z-Series
Syntax show mac accounting access-list access-list-name interface
interface in | out
Parameters
access-list-name
interface
interface
in | out
Command Modes
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage The ACL hit counters in this command increment the counters for each matching rule, not just
Information the first matching rule.
264
Enter the name of a configured MAC ACL, up to 140 characters.
Enter the keyword interface followed by the one of the following
keywords and slot/port or number information:
•
•
•
•
•
Identify whether ACL is applied on ingress or egress side.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series
Introduced on the E-Series.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet and then enter the slot/port
information.
For a Port Channel interface, enter the keyword port-
channel and then enter a number. The C-Series and S-
Series Range is 1 to 128. The E-Series range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
For a SONET interface, enter the keyword sonet and then
enter the slot/ port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and then enter the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.