Host; Lease - Dell Force10 Z9000 Reference Manual

Version 8.2.1.0

host

For manual (rather than automatic) configurations, assign a host to a single-address pool.
C-Series, S-Series, Z-Series, S4810
Syntax host address
Parameters
address/mask
Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

lease

Specify a lease time for the addresses in a pool.
C-Series, S-Series, Z-Series, S4810
Syntax lease {days [hours] [minutes] | infinite}
Parameters
days
hours
minutes
infinite
Defaults 24 hours
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Introduced on the C-Series and S-Series.
Enter the host IP address and subnet mask.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the number of days of the lease. The range is 0 to 31.
Enter the number of hours of the lease. The range is 0 to 23.
Enter the number of minutes of the lease. The range is 0 to 59.
Specify that the lease never expires.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
595