Dell Force10 Z9000 Reference Manual page 954

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

FTOS#sh fefd

FEFD is globally 'ON', interval is 10 seconds, mode is

'Aggressive'.

INTERFACE MODE

– enables far-end failure detection.

fefd disable

— disables FEFD on an interface only.

– enables FEFD globally on the system.

– resets all interfaces or a single interface that was in "error-disabled"

times the message interval. To reset an interface in this

state, use the fefd reset command.)

unknown (only found when FEFD mode is normal.

locally disabled (interface contains the fefd reset

command in its configuration).

Admin Shutdown (interface is disabled with the shutdown

Admin Shutdown

Locally disabled

Err-disabled