Write - Dell Force10 Z9000 Reference Manual

Related ip address
Commands

write

Copy the current configuration to either the startup-configuration file or the terminal.
C-Series, E-Series, S-Series, Z-Series
Syntax write {memory | terminal}
Parameters
memory
terminal
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage The write memory command saves the running-configuration to the file labeled startup-
Information configuration. When using a LOCAL CONFIG FILE other than the startup-config not named
"startup-configuration" (for example, you used a specific file during the boot config
command), the running-config is not saved to that file; use the copy command to save any
running-configuration changes to that local file.
Related save
Commands
– assigns a primary and secondary IP address to the interface.
Enter the keyword memory to copy the current running configuration
to the startup configuration file. This command is similar to the copy
running-config startup-config command.
Enter the keyword terminal to copy the current running
configuration to the terminal. This command is similar to the show
running-config command.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
– saves configurations created in BOOT_USER mode (BLI).
193