!
FTOS#
show ip bgp ipv6 unicast
View the current BGP routing table for the E-Series.
C-Series, E-Series
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-
prefixes]]
Parameters
network
network-mask
longer-prefixes
Command Modes
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
When you enable the bgp non-deterministic-med command, the show ip bgp
Information
command output for a BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specific cluster.
C-Series, E-Series
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
neighbor 1109::33 remote-as 18508
neighbor 1109::33 update-source Loopback 101
neighbor 1109::33 no shutdown
neighbor 2222::220 remote-as 18508
neighbor 2222::220 route-reflector-client
neighbor 2222::220 update-source Loopback 100
neighbor 2222::220 no shutdown
neighbor 4000::33 remote-as 18508
neighbor 4000::33 no shutdown
neighbor 4000::60 remote-as 18508
neighbor 4000::60 no shutdown
neighbor 9000::1:2 remote-as 640
no neighbor 9000::1:2 activate
neighbor 9000::1:2 no shutdown
(OPTIONAL) Enter the network address (in dotted decimal format) of
the BGP network to view information only on that network.
(OPTIONAL) Enter the network mask (in slash prefix format) of the
BGP network address.
(OPTIONAL) Enter the keywords
with a common prefix.
•
EXEC
•
EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
longer-prefixes to view all routes
501